Brother DCP-7057 Service Manual Page 130

  • Download
  • Add to my manuals
  • Print
  • Page
    / 337
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 129
2-93
Confidential
3.9 Document Feeding Problems
3.9.1 No feeding
3.9.2 Double feeding
User Check
Set the document so that it contacts the rear of the tray, and check that LCD display
varies.
Check if the number of the documents complies with the specifications in the
specification list. (35 sheets or less)
Check if the ADF cover is closed.
Step Cause Remedy
1
Document detection actuator
catching on some position
Correct the position of the document
detection actuator.
2
ADF cover open actuator catching
on some position
Correct the position of the ADF cover
open actuator.
3
Harness connection failure of ADF
motor
Check the harness connection of the ADF
motor and reconnect it.
4
Document detection actuator or
ADF cover open sensor malfunction
Check the sensor performance following
the procedure described in "Function
code 32".
If any problem occurs, replace the
document front/ADF cover open sensor
PCB ASSY.
5 Separation roller failure Replace the separation roller ASSY.
6 ADF motor failure Replace the ADF motor.
7 Main PCB failure Replace the main PCB ASSY.
User Check
Check whether the document does not use the paper which is thinner than the
specification.
Fan out the documents so that they will not stick together, and then reload them in the
ADF.
Step Cause Remedy
1
Separation rubber worn out Replace the separation rubber holder
ASSY.
Page view 129
1 ... 129 130 131 ... 337

Comments to this Manuals

No comments