5-28
Confidential
1.4.19
Continuous print test (Function code 67)
<Function>
This function allows you to conduct the pick-up and delivery test as printing patterns.
<Operating Procedure>
(1) Press the 6 and 7 buttons in this order in the initial state of the maintenance mode.
In the case of the model without the numeric keys; Press the or button. The
“MAINTENANCE 67” appears on the LCD. Then press the OK button.
(2) When “SELECT: A4” is displayed on the LCD, select a relevant paper size
using or button, and then press the OK button.
The available paper sizes are shown below.
(3) When “SELECT: TRAY1” is displayed on the LCD, press the or button to select the
print format, and press the OK button.
The available print formats are shown below.
(4) The “PAPER FEED TEST” appears on the LCD, and print of the continuous print pattern
with the selected pick-up test items starts.
(5) Press the Stop/Exit button to return to the machine to the initial state of the maintenance
mode.
LCD
SELECT: A4
SELECT: LETTER
SELECT: LEGAL
SELECT: A5
SELECT: B6
SELECT: A6
LCD
SELECT: TRAY1
SELECT: TRAY1 DX
Note:
• The test printing is stopped until there is no paper in a tray. Press the Stop/Exit button
to stop if you check the paper feeding and ejecting operations. (Printing is resumed
when paper is loaded in the tray.)
• In the case that the error occurs during test printing, the continuous print is terminated.
(If you do not press the Cancel button, printing is resumed when the error is cleared.)
• To clear the error, remove the error factors, and then press the Start button.
Comments to this Manuals