Brother DCP-7057 Service Manual Page 45
- Page / 337
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
2-8
Confidential
2.3 Operation of each part
■ Printer part
■ ADF part
Part name Operation
Pick-up roller Feed the paper from the paper tray.
Separation roller and
Separation pad
Separate into single sheet from the paper tray.
Paper edge actuator
(With paper edge actuator
model only)
Detect the rear edge of paper, and identify the paper size.
Registration front actuator Detect the front edge of paper, and control the drive of
registration roller.
When feeding from the manual feed slot, detect the passage
of paper.
Detect the paper jam of front part.
Registration roller When the front edge of the paper hit the stopped registration
roller and the inclination of the paper is corrected.
Registration rear actuator Detect the passage of paper and adjust the starting position
for writing on a sheet of paper.
When the duplex printing, detect the rear edge of paper and
adjust the timing of eject roller 2 switching.
Transfer roller By applying a minus charge to the transfer roller, the toner
adhered to the exposure drum is transferred to paper, and
feed the paper to the fuser unit.
Heat roller and Pressure roller The toner transferred on paper being fused by heat and
pressure, and feed the paper to the eject roller 1.
Paper eject actuator Detect whether or not paper is ejected from the fuser unit.
Eject roller 1 Feed the paper ejected from the fuser unit to the eject roller 2.
Eject roller 2 Eject the paper to the face-down output tray.
When the duplex printing, after the paper is fed from the eject
roller 2 with the front of sheet printed, the eject roller 2 rotates
conversely and feed the paper to the duplex tray.
DX feed roller
(Duplex printing model only)
Feed the paper passed in the duplex tray to the registration
roller.
Part name Operation
Document detection actuator Detect the passage of the document set in the document tray.
Document pull-in roller Feed the documents set in the document tray.
Document separation roller,
Separation rubber
Separate the documents fed by the document pull-in roller
one by one.
Document feed roller Feed the document to the CIS unit.
Document scanning position
detection actuator
Detect the front edge of the document, and adjust the surface
reading position.
Detect the document jams inside the ADF.
Document ejection roller Eject the document on the document cover after the surface
has been read.
- SERVICE MANUAL 1
- TRADEMARKS 2
- REGULATION 9
- WARNING 10
- CAUTION 10
- Radio Interference 11
- (For USA) 13
- (MFC only) 14
- Internal laser radiation 15
- SAFETY INFORMATION 16
- CHAPTER 1 21
- CHAPTER 1 SPECIFICATIONS 22
- 1. SPECIFICATIONS LIST 23
- <Computer requirements> 26
- 1.2 Network Connectivity 28
- 1.3 Service Information 29
- 1.4 Consumables 30
- 1.5 Paper 31
- 1.5.1 Paper handling 31
- 1.5.2 Media specifications 31
- 1.6 Unprintable Area 32
- 1.7 Telephone 32
- 1.9 Copy 33
- 1.10 Scanner 33
- 1.11 Unscannable Area 34
- 1.12 USB Direct Interface 34
- CHAPTER 2 35
- 1. INTRODUCTION 38
- 1.2 Initial Check 39
- 2.1 Cross-section Drawing 41
- ■ ADF part 42
- 2.2 Paper Feeding 43
- 2.3 Operation of each part 45
- 2.4 Block Diagram 46
- 2.5 Components 47
- 3. ERROR CODES 52
- 3.2 Error Messages 57
- 3.3 Communications Error Code 59
- Refer to: 60
- 3.4 Error Cause and Remedy 62
- ■ Error code 19 63
- ■ Error code 1A 64
- Error code 1B 64
- Error code 1C 64
- Error code 1D 64
- ■ Error code 1E 64
- Error code 35 68
- ■ Error code 36 68
- ■ Error code 37 68
- Error code 38 68
- Error code 39 68
- Error code 3A 69
- ■ Error code 3B 69
- ■ Error code 57 74
- ■ Error code 58 74
- ■ Error code 59 75
- ■ Error code 63 77
- ■ Error code 64 77
- Error code 65 77
- Error code 66 77
- ■ Error code 67 78
- ■ Error code 68 78
- Error code 69 78
- ■ Error code 6A 78
- ■ Error code 6B 78
- ■ Error code 6C 79
- ■ Error code 6D 79
- ■ Error code 6E 79
- ■ Error code 6F 80
- ■ Error code 70 80
- ■ Error code 71 81
- Error code 72 81
- ■ Error code 73 81
- Error code 74 81
- ■ Error code 75 82
- ■ Error code 76 82
- Error code 78 82
- ■ Error code 7A 82
- ■ Error code 7B 83
- Error code 7C 83
- ■ Error code 7D 83
- ■ Error code 7E 84
- ■ Error code 7F 84
- ■ Error code 80 84
- ■ Error code 81, 82 84
- ■ Error code 83 85
- ■ Error code 84 85
- ■ Error code 85 86
- Error code 86 86
- Error code 87 86
- ■ Error code 88 86
- ■ Error code 89 87
- ■ Error code 8A 87
- ■ Error code 8B 88
- Error code 8C 88
- ■ Error code 8D 88
- Error code 97 90
- Error code 98 90
- Error code 99 90
- ■ Error code 9A 90
- ■ Error code 9B 91
- ■ Error code 9C 91
- ■ Error code 9D to 9F, A0 92
- ■ Error code A1 92
- ■ Error code A2 93
- ■ Error code A3 93
- ■ Error code A4 94
- ■ Error code A5 94
- ■ Error code A6 94
- ■ Error code A7 94
- ■ Error code A8 95
- ■ Error code A9 95
- Error code AA, AB 95
- Error code AC 95
- ■ Error code AD 95
- ■ Error code AE 96
- ■ Error code AF 96
- ■ Error code B0 96
- ■ Error code B8 98
- ■ Error code B9 98
- ■ Error code BA 98
- ■ Error code BB 98
- ■ Error code BC 99
- ■ Error code BD 99
- ■ Error code BE, BF 99
- ■ Error code C0 99
- ■ Error code C1 to C6 100
- ■ Error code C7 100
- ■ Error code C8 100
- ■ Error code C9, CA to CF 101
- ■ Error code D1 101
- ■ Error code DE 102
- ■ Error code DD 102
- ■ Error code DF 103
- ■ Error code E0 103
- ■ Error code E1 103
- ■ Error code E2 104
- ■ Error code E3, E4 104
- ■ Error code E6 104
- ■ Error code E7 to E9, EA, EB 105
- ■ Error code EC 105
- ■ Error code ED 105
- ■ Error code EE 106
- ■ Error code EF 106
- ■ Error code F0 107
- ■ Error code F1 to F6, F8 107
- ■ Error code F9 107
- ■ Error code FA to FF 107
- 3.5 Paper Feeding Problems 108
- 3.5.2 No feeding 108
- 3.5.4 Double feeding 109
- 3.5.5 Paper jam 110
- Confidential 111
- 3.5.6 Dirt on paper 112
- 3.5.8 Wrinkles or creases 113
- 3.5.9 Curl in the paper 114
- 3.5.12 Paper size error 115
- 3.6.1 Image defect examples 116
- Fig. 2-11 118
- Fig. 2-12 118
- ■ Faulty registration 119
- ■ Poor fixing 120
- ■ Completely blank 120
- ■ Image distortion 121
- ■ All black 121
- ■ Vertical streaks 122
- ■ Black horizontal stripes 123
- ■ White vertical streaks 124
- ■ White horizontal streaks 124
- ■ Faint print 124
- ■ White spots 125
- ■ Black spots 125
- ■ Black band 126
- ■ Horizontal lines 126
- ■ Fogging 127
- 3.7 Software Setting Problems 128
- 3.7.1 Cannot print data 128
- 3.8 Network Problems 129
- 3.9 Document Feeding Problems 130
- 3.9.1 No feeding 130
- 3.9.2 Double feeding 130
- 3.9.3 Paper jam 131
- 3.9.4 Wrinkles 132
- 3.10.1 Image defect examples 133
- ■ Dark (Error code BB, etc) 134
- 3.11.3 Lamp malfunction 136
- 3.12.1 FAX can't send it 137
- 3.12.3 No bell ring 137
- 3.13 PCB Problems 139
- 3.13.1 Main PCB failure 139
- 3.13.2 Out of Memory 139
- 3.13.5 NCU ASSY failure 140
- 3.14 Other Problems 141
- CHAPTER 3 142
- CONTENTS 143
- 1. SAFETY PRECAUTIONS 145
- 2. PACKING 146
- 4. SCREW TORQUE LIST 148
- 5. LUBRICATION 150
- ■ Paper feeder part 151
- ■ Development part 152
- Fig. 3-6 153
- Fig. 3-7 153
- 7. HARNESS ROUTING 154
- 1 Paper edge sensor PCB ASSY 154
- Printer top side 154
- 3 Internal temperature sensor 156
- 4 New toner sensor PCB ASSY 157
- 6 Paper eject sensor PCB ASSY 159
- 7 Main motor 160
- 8 Laser unit 160
- 10 Fan motor 60 ASSY 161
- 13 Fuser unit 163
- 14 Speaker unit 164
- 15 NCU ASSY 164
- 16 NCU FG harness ASSY 165
- 17 Panel unit 165
- 18 Document scanner unit 166
- 19 ADF sensor 167
- 20 ADF motor 168
- 21 Hook switch PCB 169
- Main PCB ASSY 169
- Hook switch PCB 169
- Side cover L 169
- 9. DISASSEMBLY PROCEDURE 171
- Fig. 3-8 172
- 9.1 Paper Tray 173
- Fig. 3-10 174
- Fig. 3-11 175
- Fig. 3-12 175
- 9.2 Cord Hook 176
- 9.3 Back Cover 177
- 9.4 Outer Chute ASSY 178
- 9.5 Fuser Cover 179
- Fig. 3-17 180
- Fig. 3-18 181
- Fig. 3-19 182
- Fig. 3-20 183
- Fig. 3-21 184
- Fig. 3-22 185
- Fig. 3-23 185
- Fig. 3-24 186
- 9.9 Side Cover R 187
- ADF Unit 188
- Fig. 3-27 189
- Fig. 3-28 190
- Fig. 3-29 190
- Document Stopper 191
- ADF unit 192
- Document sub tray 192
- Gear Cover 194
- Separation Roller ASSY 195
- Separation Rubber Holder ASSY 196
- Taptite cup B M3x10 197
- Back side 197
- Document Feed Roller ASSY 198
- Document cover 199
- Ejection Roller ASSY 200
- Taptite cup S M3x6 SR 201
- Screw pan (S/P washer) M3x6 202
- ADF motor 202
- Fig. 3-43 203
- Fig. 3-44 204
- Fig. 3-45 205
- Fig. 3-46 206
- CN26CN5 CN4 207
- Fig. 3-48 208
- Fig. 3-49 209
- 9.13 Document Scanner Unit 210
- Panel PCB ASSY 212
- Rubber Key L/R 213
- Fig. 3-54 214
- Fig. 3-55 214
- Lock claw 215
- Pull arm guide 215
- Joint cover 215
- 9.16 NCU ASSY 216
- Fig. 3-58 217
- Fig. 3-59 218
- Connector 220
- (Speaker harness ASSY) 220
- (Speaker harness ASSY) 220
- (4) Remove the speaker unit 221
- Fig. 3-64 223
- 9.19 Fuser Unit 224
- Fig. 3-67 225
- Fig. 3-68 226
- Fig. 3-69 227
- Fig. 3-70 228
- Fig. 3-71 228
- Fig. 3-72 229
- 9.21 Fan Motor 60 ASSY 230
- Fig. 3-74 231
- Fig. 3-75 232
- 9.24 Filter 233
- 9.25 Laser Unit 234
- Fig. 3-78 235
- Fig. 3-79 235
- Fig. 3-80 236
- Fig. 3-81 237
- 9.28 Rubber Foot 238
- 9.29 Main PCB ASSY 239
- Fig. 3-84 240
- Fig. 3-85 241
- 9.31 Main Frame L ASSY 242
- Fig. 3-87 243
- Fig. 3-88 244
- Fig. 3-89 245
- Fig. 3-90 246
- Fig. 3-91 247
- Fig. 3-92 248
- Fig. 3-93 249
- Fig. 3-94 250
- 9.36 Fuser Gear 28/34 251
- CHAPTER 4 252
- 1.4 Setting the Serial Number 256
- Fig. 4-1 257
- Fig. 4-2 259
- SCANNER UNIT 262
- 4-10 Confidential 263
- CHAPTER 5 264
- CHAPTER 5 SERVICE FUNCTIONS 265
- 1. MAINTENANCE MODE 267
- ■ Black and white scanning 271
- ADF CHECK P.01 272
- Fig. 5-2 273
- ■ Worker switch 274
- WSWXX = 0 0 0 0 0 0 0 0 276
- Selector 1 Selector 2 276
- Fig. 5-3 277
- Fig. 5-4 278
- ■ MFC-7360/7360N 279
- (Only for handset models) 280
- Low Medium High 282
- 1,100 Hz 282
- High Medium Low 282
- ■ Location of sensors 283
- ■ Function setting 285
- ■ Detail description 286
- ■ Cover page sample 291
- ■ End page sample 291
- Fig. 5-12 292
- ■ Maintenance information 298
- FAN: 100% 299
- FAN: 50% 299
- FAN: OFF 299
- (Function code 88) 305
- 2. OTHER SERVICE FUNCTIONS 306
- 2.5 Drum Cleaning 309
- 2.6 Deep Sleep Function 310
- CHAPTER 6 311
- 1. CIRCUIT DIAGRAMS 313
- 2. WIRING DIAGRAM 322
- CHAPTER 7 323
- APPENDIX 1 326
- A 0 J 1 1 1 1 0 1 327
- APPENDIX 2 328
- APPENDIX 3 330
- App. 3-4 334
- Continue Anyway 334
- to proceed 334
- APPENDIX 4 336
- Fig. APP. 4-1 337
Related products and manuals for Print & Scan Brother DCP-7057
Print & Scan Brother PJ673-K User's Guide
(75 pages)
(75 pages)
Print & Scan Brother DCP-8085DN User Manual
(154 pages)
(154 pages)
(23 pages)
Print & Scan Brother MFC-9100C Service Manual
(488 pages)
(488 pages)
Print & Scan Brother HL-5450DNT Service Manual
(313 pages)
(313 pages)
Print & Scan Brother P-Touch 2410 User's Guide
(202 pages)
(202 pages)
Print & Scan Brother DCP-8085DN User Manual
(149 pages)
(149 pages)
© 2020, manymanuals.com. All rights reserved. | 0.157 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals